What are the specifications of alloy saw blades?
Release time:
2024-08-02
Many people don't know enough about the specifications of alloy saw blades, and they are not very clear about the outer diameter of alloy saw blades. This makes it difficult to buy saw blades.
Outer diameter
Many people don't know enough about the specifications of alloy saw blades, and they are not very clear about the outer diameter of alloy saw blades. This makes it difficult to buy saw blades. In fact, there are generally two kinds of saw blade outer diameter. For example, one: someone said 200 large saw blade, that is expressed in the outer diameter of 200mm; two: if someone said 8 inch saw blade, that also said 200MM saw blade, because here the inch refers to the inches. (1 inch = 25.4mm). This is the saw blade specifications outside diameter of the general knowledge.
Bore diameter
The hole diameter of an alloy saw blade is the diameter of the positioning hole inside the blade. Typically, alloy saw blades are categorized into 25.4mm and 30mm diameters.
Generally speaking, the hole diameter of saw blades from 4 inches to 10 inches is 25.4mm. 12 inches and above is 30mm, of course, there are also saw blades with hole diameter of 25.4mm above 12 inches.
Number of teeth
The number of teeth refers to the number of teeth of the alloy saw blade. Generally, the number of teeth of alloy saw blades is indicated by the letter T, for example, 60T means 60 teeth. Generally, according to the cutting requirements and efficiency of the selection of the appropriate number of teeth of the saw blade, commonly used number of teeth 30, 40, 60, 80, 100, 120T, but there are also special number of teeth, such as cutting board saw blade with 70 teeth and 96 teeth.
Previous
Previous
Related News
QUICK NAVIGATION
Add: Guancheng Village, Luoyang Town, Wujin District, Changzhou City, Jiangsu Province, China.
Copyright © 2024 CHANGZHOU ANTALYA TOOL AND MACHINERY CO., TLD. | Business license